Home › Forums › LUG discussions › BUY / SELL / TRADE! › A Call for Parts! Parts Needed!
- This topic has 10 replies, 2 voices, and was last updated 10 years, 10 months ago by Dan.
-
AuthorPosts
-
December 27, 2013 at 4:39 pm #4632DanParticipant
Hello fellow LUGians! I am in desperate need of the following parts! (Alright, I could order them, but I figured if anyone had a few I could save the headache and pick them up at the next meeting.)
Peeron part numbers provided:
2486 Yellow Bar 1 x 8 x 2 – x2
4095a Red Bar 6.6L with Thin Stop – x2
4079 Black Minifig Accessory Seat 2 x 2 – x1
4861 Yellow Slope Brick 45 3 x 4 Double 33 – x1Assorted classic town folk (stripped shirts, hair, and hats)
Please let me know if you have any of these!
December 27, 2013 at 7:06 pm #4633Greg SchubertParticipantI think I have all those parts, but I’m not sure which minifigs meet your criteria.
I find that I am in need of 1×1 light gray or light bluish gray “round bricks,” (essentially cylinders.) Do you have any of those to trade Dan?
- This reply was modified 10 years, 10 months ago by Greg Schubert.
January 1, 2014 at 7:47 pm #4699DanParticipantAny or all of the following minifigs would work:
http://www.bricklink.com/catalogItem.asp?M=hor013
http://www.bricklink.com/catalogItem.asp?M=ncklc007
http://www.bricklink.com/catalogItem.asp?M=par049
http://www.bricklink.com/catalogItem.asp?M=trn091
http://www.bricklink.com/catalogItem.asp?M=trn068
http://www.bricklink.com/catalogItem.asp?M=trc004
http://www.bricklink.com/catalogItem.asp?M=ver011
http://www.bricklink.com/catalogItem.asp?M=air002
http://www.bricklink.com/catalogItem.asp?M=air005I think I have light bley cylinders (cannon balls!) around. If not I’ll get some with the next order I do. I have a new monorail car design on the way and need some parts 😀
January 1, 2014 at 10:10 pm #4701Greg SchubertParticipantI think I have light bley cylinders (cannon balls!) around. If not I’ll get some with the next order I do.
Ok, I did some intense organizing this morning and found that I DO have these after all, so I don’t think you need to order additional.
Btw, I still have a mime that I bought for someone else on bricklink this summer. Would that be good for a person with a striped shirt? 🙂 Are these minifigs all from the 6399 Airport Shuttle set?
- This reply was modified 10 years, 10 months ago by Greg Schubert.
January 1, 2014 at 10:35 pm #4706DanParticipantAlright! Let me know if you need anything else and I can look in my collection.
A mime would be an interesting addition… I’ll have to think on that!
Those minifigs all happen to be from 6399! I have some of them, but I’d like to make sure I have a full complement!
January 19, 2014 at 5:19 pm #4900Greg SchubertParticipantPeeron part numbers provided:
2486 Yellow Bar 1 x 8 x 2 – x2
4095a Red Bar 6.6L with Thin Stop – x2
4079 Black Minifig Accessory Seat 2 x 2 – x1
4861 Yellow Slope Brick 45 3 x 4 Double 33 – x1Dan, do you still need any or all of these? Right now I am now desperate for a trans CLEAR antenna.
http://www.bricklink.com/catalogItem.asp?P=3957January 20, 2014 at 10:43 pm #4902DanParticipantI am still in need of those parts! Sadly I don’t have a trans clear antenna. Do you need any other parts?
January 23, 2014 at 5:08 am #4916Greg SchubertParticipantHow about a light gray (not bley) 6×14 plate?
January 23, 2014 at 7:38 pm #4917DanParticipantI’ll check when I get home, but I’m not confident I have an old gray plate in that size. How about trans-neon green satellite dishes?? Or light bley hinge plates???
January 25, 2014 at 9:04 am #4930Greg SchubertParticipant2486 Yellow Bar 1 x 8 x 2 – x2
4095a Red Bar 6.6L with Thin Stop – x2
4079 Black Minifig Accessory Seat 2 x 2 – x1
4861 Yellow Slope Brick 45 3 x 4 Double 33 – x1I found two yellow bars, one red bar and one black seat, but the yellow slope that you require was more elusive than I expected.
January 25, 2014 at 9:17 am #4931DanParticipantI was able to locate one black 6×14 plate (as well as 4 black 6 x 16 plates and 3 old gray 6 x 12 plates). Would black work instead of old gray?
-
AuthorPosts
- You must be logged in to reply to this topic.