- This topic has 1 reply, 2 voices, and was last updated 10 years, 3 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
These articles pop up from time to time. Always a fun read.
You don’t have to do a linear regression to see that LEGO sets generally run about 10 cents per piece, but its good to know that the data backs up this perception.
What’s also interesting to consider is the cost per stud on bricklink. This is not linear at all. A 1×1 plate with one stud might cost 5 cents but a 6×8 plate with 48 studs only costs 15 cents. If this were linear, (assuming the y-intercept is zero,) the 6×8 plate would cost $2.40 and a 32×32 baseplate would cost fifty bucks!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.